Welcome To Forbwoods

New Arrivals

Radiata Pine

Flush Doors

Low	Medium	High	Moisture content (%)	Notes	References
2.	330			Basic density of inner corewood (first five rings)	Forestry compendium, CAB International
3.	450			In the outerwood	Forestry Compendium CAB International
4.	513		15		Woods of the World ( http://www.forestworld.com

FLUSH - DOOR IS 2202 (Boiling Water Proof, BWP)
Moisture Content (%)	10-12
Flatness of shutter (twist, cupping & warping)	Deviation not more than 1 mm
Local Planeness (Surface smoothness)	Deviation not more than 0.5 mm
Impact Indentation	Not more than 0.2 mm by a weight of 0.5 kg
Flexure Resistance (Residual Deflection)	Not more than 2 mm
Edge Loading
a) Residual Deflection	Not more than 0.2 mm
b) Lateral Buckling	Not more than 1.5 mm
Shock Resistance	No visible damage after 25 blows of 5 kg
Buckling Resistance
a) Initial Deflection	Not more than 40 mm
b) Residual Deflection	Not more than 5 mm
Slamming of the Shutter	No visible damage after 50 impacts of 15 kg
End Immersion	Do delamination after immersion
Adhesion of Piles	Excellent
Glue Adhesion	No delamination of glue line
Screw Holding Strength (kg)	> 125
Preservative Treatment
Three tier Treatment	1. Lumber and veneers are treated with preservatives.
	2. Glue line is fortified with non-leachable organophosphorus compound (USA technology)

AK flush doors are manufactured using the finest timber, followed by treatment with unique chemical composition to withstand any form of attacks from insects and micro organisms. They are excellent insulators against dust, heat and noise.

Radiate Pine (Naturally resistant to Borer & Termites)

100% Imported

Name Radiata Pine (Insignis Pine)

Other Names also known as New Zealand pine

Sources Grows in New Zealand and Australia.

Appearance Very attractive wood with straight grain, very close density, honey coloring, and subdued growth rings.

Physical Props

Similar in strength and hardness to United States yellow

Pines but has much better working qualities rates medium

In bending and crushing strength and low in stiffness,

Shock resistance, and decay resistance. Stable in service

But can distort significantly if not seasoned properly.

Working Props Glues and finishes without difficulty and holds nails and

Screws quite well.

Uses Used for staircases, trim, sash, doors, cabinet framing,

Vehicle components, furniture, turnery, general

Construction, plywood veneers, and pulp.